My hibeams no longer work because when I pull back on the turnsignal lever it does not click them on.  There is no force back against the lever and it does not even turn the hibeams on when I hold it back.  What do I need to do to fix this.  Should I just go to a junk yard and buy a new turnsignal?
							
						
					Announcement
				
					Collapse
				
			
		
	
		
			
				No announcement yet.
				
			
				
	
Turnsignal
				
					Collapse
				
			
		
	X
- 
	
	
		
		
		
		
		
		
		
	
	
	
Sounds like the switch is bad. Here is the switch http://shbox.com/ignsw/column2.jpg Here is the switch removed http://shbox.com/ignsw/column3.jpg Here are the instructions for replacing the ignition switch which is right beside the dimmer switch http://shbox.com/ignsw/ign_switch_repl.html . You can use the instructions to get to the dimmer. Obviously ignore the part about replacing the ignition switch. I would advise you while you have it apart to look at the connector going to the ignition switch for heat damage like this http://shbox.com/ignsw/switch_conn2.jpg . The Gm part number for the dimmer switch is 26035242 $10.84 from http://www.gmpartsdirect.com/. The AC Delco part number is D805A $17.43 from http://www.carparts.com/ . http://www.carparts.com/parts/search...D805A&x=6&y=13 . You can probably get the AC-Delco part from a local parts store.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
 - 
	
	
		
		
		
		
		
		
		
	
	
	
jeff 95 Z28,
this is why i visit this forum. you have questions and people that know what they are talking about respond. awesome work.
ed
1995 Z28 A4, SCC Ultra Z Hood with Air box/K&N filter, Granatelli Maf Sensor/Fernco bellow/Hotchkis STB/white face gauges/LT4 Knock module/March pullies/160* stat without Hypertech Tunning/Borla 3" y-pipe/HI Flo 3" cat/SLP Loudmouth/GM Motive 3.73's + TA rear end girdle/Afs ZR1's silver painted with polished lip 17x9.5 front & 17x11 out back/98 tail light's/BMR SFC's/spohn Lca's/spohn relo brackets & spohn adj. panhard rod  " coated mid lenght pacesetters headers + 1.6rr + custom pc tuning going on soon hopefully "
Comment
 
Comment