93 Throttle Position Sensor Interchangeable With 95?
Here is my delimma. I have a 95 Z28. I was searching for a new TPS connector/pigtail and all I could come up with is the 3 pin FLAT style connector. My car has the 3 pin ROUND style connector. After some searching I found that the 93 cars have that same type of round connector as what I have in my 95. Should I just purchase the round/93 connector and call it a day? Through my ownership of the car I have never noticed anything wrong as long as the car is running right.
-
'95 White Z28 M6 Cold air intake with K&N air filter, air foil, flowmaster cat-back, eaton posi, motive 4.10s, aluminum driveshaft, "skip shift" eliminator, '97 Z28 chrome wheels, hypertech programmed -
Shoebox's pigtail list shows the same part # for 93-97.
PT375 1993-1997 TPS and a/c pressure sensor 12102748
My 94 has a round connector. When I had a problem with the wire sequence, Shoebox sent me a photo of his 95, and it was a round connector.
Shoebox's 95 from his website:
http://shbox.com/1/tps.jpg
My 94:Attached FilesFred
381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor -
Comment