lt1 t/a with cowl hood

[PUREPWR]

Does anybody got a pic of a black lt1 t/a with a cowl hood on it. i love the ws6 hood but i dont want my car to look factory stock. Any pics would be great.

[RocKin1967]

HEY, well i found this looks pretty kool, but u should also check out the "Big Block Hood" they have it looks bad *** on ur car, and I havent seen it on a 4th gen before its pretty kool being unique. well later man... here's the link

http://www.fbodymotorsports.com/inc/pdetail?v=1&pid=139

[Injuneer]

Would you settle for red? This car belongs to Matt Swindle. The pictures were taken at CJC/FO's "Fastest F-Body" event at Englishtown in 2000. Matt's car was also included in the recent Hot Rod magazine "Pump Gas Drags" competition.....

[fastTa]

www.vfnfiberglass.com has a few variations of the WS6 hood.

So does www.glasstek.com.

[PUREPWR]

Hey injuner is that a 4 inch or what size is that. Do you have any specs on where to get and how much . Is there any other hoods for our cars besides the ws6, warbird, cowl, and big bloack. My dream hood is a ws6 hood that raises up like 3 inchs. Kinda like a cowl/ram air.thanks tom

[darkz711]

Hey injuner is that a 4 inch or what size is that. Do you have any specs on where to get and how much . Is there any other hoods for our cars besides the ws6, warbird, cowl, and big bloack. My dream hood is a ws6 hood that raises up like 3 inchs. Kinda like a cowl/ram air.thanks tom

H3047 93-97 Firebird 4" Raised Ram Air bolt on hood

its more like the new ram air ws6 hood but still

[fastTa]

Hey injuner is that a 4 inch or what size is that. Do you have any specs on where to get and how much . Is there any other hoods for our cars besides the ws6, warbird, cowl, and big bloack. My dream hood is a ws6 hood that raises up like 3 inchs. Kinda like a cowl/ram air.thanks tom

It's made by ASCD (American Sports Car Design). I believe it is a 4".

http://www.americansportscardesigns.com/firebird.shtml

LMPerformance has it a little cheaper:

http://www.lmperformance.com/2831/2.html

[fastTa]

Tom do you mean a hood like this:



This is made by VFN Fiberglass.

And this one is made by Glasstek:

[TruckMuddr]

ok, You asked for black so here you go.

[fastTa]

Sent you a PM Richard.

[TruckMuddr]

Now you have one

[DeWynter]

Tom do you mean a hood like this:



This is made by VFN Fiberglass.

And this one is made by Glasstek:

How the He)) do you see past somthing like that? The WS6 hood is already a loss in sight, Heck even the difference between a stock 3rd gen FB hood and the Power buldge is a loss if sight, but at least I can see to the passanger side!

[markd79ta]

How the He)) do you see past somthing like that? The WS6 hood is already a loss in sight, Heck even the difference between a stock 3rd gen FB hood and the Power buldge is a loss if sight, but at least I can see to the passanger side!

My R/A hood is pretty aggressive with a larger then stock cowl and It is just about perfect...I can actually see the top of the hood instead of my sight of the car ending at the windshield (I hate that on 4th gens).

[DeWynter]

I guess its just different in 3rd gens as I can see to where my headlights start, and I kind of like that just gives me a feeling knowing where my nose is in relation to other cars and stuff.

[PUREPWR]

FastTA yes that is the hood i want but not that big. That is the vfn hood that company is in addison illinois like 20 mins from my house. I dont want one that big tho. I want like a 3 inch. I asked ifi they could fabricate me a custom one and they said no.