Originally posted by jodyg
Announcement
Collapse
No announcement yet.
Trans Am vs Mustang....who will win this race??
Collapse
X
-
Originally posted by lt1maroEven if he dead hooks out of the hole, you will still run him down. Those 5.0's were straight dogs. I took a head/smallcam/bolt on 5.0 to beat my car by a few inches. He also had 3.73 gears too. But the aftermarket fo those things are huge. So watch out if he plans on putting any money into that thing.
If he dead hooks out of the hole, and doesnt have a tremac tranny, you will be giving him a ride home. ive had my share of mustangs, and that stock 5 speed and slicks or even cheater slicks at the track will soon take its toll.2000 WS6 T/A M6. Monster stage 3 clutch, flowmaster cat back, 4.10's, SLP lid, Hurst shifter.
1996 Mustang GT 5 speed STOCK DD
past rides:
1996 Mustang GTS bright tangerine orange
2003 Mach 1 azure blue drag car (10.90@118 record holder for fastest N/A mach)
1969 Mach 1 house of colors candy apple red393 stroker 100 shot (10.829@125 in street trim)
2003 Mach 1 Torched red FRPP aluminator/vortech 666RWHP
2008 Mustang GT JDM stroker long block, Saleen 2.3 twin screw
1980 Mustang L 13.7: 418 stroker
1994 Z28 A4 rebuilt from wreck
1994 Z28 A4 totaled
Comment
-
Originally posted by raroZ28a 94 5.0 with a catback, cai and gears will run low 14's? I bought the wrong car. If those little mods knocked off 2-2.5 seconds, I def. got the wrong car.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Originally posted by raroZ281994 Ford Mustang GT 0-60, 6.7 1/4 mile et, 15.1
with that many miles he isn't getting a time close to that. I have seen 4.6L 5 speed mustangs with that body style that run high 15's low 16's, with at least a catback.
It should run a low 14 and trap mid 90s BONE STOCK... It's only 225 HP, yes, but 315 TQ, and it weighs less.Former Ride: 2002 Pontiac Trans Am WS6 - 345 rwhp, 360 rwtq... stock internally.
Current Ride: 2006 Subaru Legacy GT Limited - spec.B #312 of 500
Comment
-
I'm gonna say that in this race, he'll get the jump out of the hole, but you will unquestionably pass him quickly and win this race... I think Jeff is right... by half a second.
It won't be terribly close... but he won't run a 15 either.Former Ride: 2002 Pontiac Trans Am WS6 - 345 rwhp, 360 rwtq... stock internally.
Current Ride: 2006 Subaru Legacy GT Limited - spec.B #312 of 500
Comment
-
Originally posted by Jay 02 TA ws6raro - a 1994 Mustang GT isn't even CLOSE to 15 second territory. I don't know where you got that from.
It should run a low 14 and trap mid 90s BONE STOCK... It's only 225 HP, yes, but 315 TQ, and it weighs less.
http://www.ssmoparmuscle.com/speedcomp.htm
I have never read or heard of a stock 94 mustang running a low 14. That's what a lot of LT1 camaro's are running in stock form. My friend has a 96 cobra with like 90 some thousand on the clock and I walked him in stock form. His car has a flowmaster on it. When he caught up to me, all he could say is, this car's got nothin'.
There is also a kid that comes through my car wash in a 4.6L purple GT with a 5 speed. He came to the wash with his E/T on his winshield 15.7, I kid you not. He has a flowmaster, I know this for sure. What is under the hood, I don't know. You think a Stock 94 GT can run a low 14...? I highly doubt it. Under perfect conditions it might break into 14's, but not stock, no way. If I'm wrong I'll be suprised, but I'm just goint by what I see. I have to see an actual 1/4 mile e/t from a stock 94 gt. I could be wrong though... When all I had on my Conquest was exhaust and upped boost, I would walk them all day.97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM
01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines
Comment
-
The 94 and 95 still had 5.0 motors in them. They are faster than the 96-98 4.6 2 valve Mustangs. The 4.6 head sucks. I'm actually going to help my neighbor design a new one for his race shop. The 4 valve Cobras had a lot of flow problems too. The were not well done. The 5.0 motor was like 30 ft pound of torque more than the 4.6 even though they were rated at the same horse power. The 5.0 motor also has way more bottom end than the 4.6 motor. You'll find that the 5.0 Mustangs are strong up to about 30 then they fall flat. That is why I put a cam in mine. The 5.0 motors are bullet proof though. The 4.6 motors are not. The 4 valve 4.6 head was fixed in 2003. My neighbor is getting over 320 CFM per cylinder out of them compared to about 260 cfm out of a 2 valve head. I need to ask them what they are getting out of LT1 and LS1 heads. They don't do as many of them. They don't need work as bad as the 4.6 motors do.
There is something wrong with a Mustang that can't break into the 14s. It might have a hard time in Colorado though.
When I was at my neighbors shop Saturday they were building a 427 cid LS1 motor for a guy with a Corvette. drool drool2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Originally posted by Jeff 95 Z28The 94 and 95 still had 5.0 motors in them. They are faster than the 96-98 4.6 2 valve Mustangs. The 4.6 head sucks. I'm actually going to help my neighbor design a new one for his race shop. The 4 valve Cobras had a lot of flow problems too. The were not well done. The 5.0 motor was like 30 ft pound of torque more than the 4.6 even though they were rated at the same horse power. The 5.0 motor also has way more bottom end than the 4.6 motor. You'll find that the 5.0 Mustangs are strong up to about 30 then they fall flat. That is why I put a cam in mine. The 5.0 motors are bullet proof though. The 4.6 motors are not. The 4 valve 4.6 head was fixed in 2003. My neighbor is getting over 320 CFM per cylinder out of them compared to about 260 cfm out of a 2 valve head. I need to ask them what they are getting out of LT1 and LS1 heads. They don't do as many of them. They don't need work as bad as the 4.6 motors do.
There is something wrong with a Mustang that can't break into the 14s. It might have a hard time in Colorado though.
When I was at my neighbors shop Saturday they were building a 427 cid LS1 motor for a guy with a Corvette. drool drool97 Chevy 'Raro Z28 M6- Ported & Polished LT1 heads,beehives,1.6/1.94 valves, 226/231 custom cam,K&N FIPK, 94-95 BBK shorty's,ORY,Magnaflow Catback,no cats,BMR LCA Relocation Brackets,Lower Control Arms,Adjustable Panhard Bar,Eibach Pro Kit,SPEC Stage 1,Walbro 255 Fuel Pump,30LB Injectors,Pro 5.0,Short stick,MSD 8.5's,NGK TR55's,LT4KM
01 Honda CBR600 F4i-Two bro's,Corbins,SS brake lines
Comment
-
Originally posted by raroZ28I got it from this page.
http://www.ssmoparmuscle.com/speedcomp.htm
I have never read or heard of a stock 94 mustang running a low 14. That's what a lot of LT1 camaro's are running in stock form. My friend has a 96 cobra with like 90 some thousand on the clock and I walked him in stock form. His car has a flowmaster on it. When he caught up to me, all he could say is, this car's got nothin'.
There is also a kid that comes through my car wash in a 4.6L purple GT with a 5 speed. He came to the wash with his E/T on his winshield 15.7, I kid you not. He has a flowmaster, I know this for sure. What is under the hood, I don't know. You think a Stock 94 GT can run a low 14...? I highly doubt it. Under perfect conditions it might break into 14's, but not stock, no way. If I'm wrong I'll be suprised, but I'm just goint by what I see. I have to see an actual 1/4 mile e/t from a stock 94 gt. I could be wrong though... When all I had on my Conquest was exhaust and upped boost, I would walk them all day.2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Originally posted by raroZ28Ahh, I had no idea the 4.6 was slower. That had a lot to do with what I said. I thought for sure a 96 would beat a 94. Seeing how slow the 96's were, I assumed that the further back you went in model years, the slower. My bad2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Hey Jeff, I am almost certain your Mustang was a factory freak...I'm still trying to figure out everything, but up until now, I thought the early '80s Stangs were 15 second cars My friend has an '84 GT HO 5 spd (175 hp only). Now I thought this thing was a factory freak...he used to beat every Fox Body out there (doing unwise street racing)....roughly 0-100. In all honestly, I never saw him lose to a stock/near stock stang. He would also take out the '94-'95 models. In 1999, we finally took out cars to the track, and the best time he got as a 15.7 with a 2.3 60'. His traction wasn't there, but I don't see how he could have made up a full 1.5 seconds. I also raced several '82'-'93 stock Mustangs...and their best ET were also mid to very low 15s. (I still have their time slips). My other friend had an '89 Mustang that had a best 0-60 run of 6.3 seconds. That was with many bolt-ons. Don't get me wrong, I believe what you're saying, but I've had Ford friends who bought all kinds of '84-'93 Mustangs, and could even get into the 14s94 Black T/A GT, Advanced Induction 355, 3200 stall, built 4L60E, Moser 9", Baer Brakes, Shooting for 11s...
Comment
-
Originally posted by raroZ28
2003 Ford SVT Mustang Cobra 4.6 12.90
I thought they were a mid 13 car.
1993 Ford Mustang Cobra 5.9 14.50
1994 Ford Mustang Cobra 6.9 15.30
As far as I remember the engine was unchanged in the Cobra from 93 to 94. How could it loose a whole second on the 0-60 time and .8 in the quarter.
1974 Ford Mustang II Auto 15.6 19.40 LMAO!!!
Here's another one.
1967 Dodge Charger - 426 Hemi Auto 6.4 14.20
1968 Dodge Charger - 426 Hemi Auto 4.8 13.50
I think the 67 was a solid cam motor and the 68 must have been hydraulic. I thought that wasn't until 1970 though.
1990 Chevrolet Corvette ZR-1 4.4 12.80
1992 Chevrolet Corvette ZR-1 5.6 13.90
What happened in 92???
1983 Lamborghini Jalpa 7.3 15.40 Bad year. Ouch2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
I'm really confused. I thought those mustangs were really fast, specially if they have the flame decals in the windows and the huge "BOSS" stickers.
Maybe you havent raced any with the stickers yet??
Tracy
2002 C5 M6 Convertible
1994 Z28 M6 Convertible
Current Mods:
SLP Ultra-Z functional ramair, SS Spoiler, STB, SFCs, Headers, Clutch, Bilstein Shocks, and TB Airfoil. 17x9 SS rims with Goodyear tires, 160F T-Stat, MSD Blaster Coil, Taylor wires, Hurst billet shifter, Borla catback with QTP e-cutout, Tuned PCM, 1LE Swaybars, 1LE driveshaft, ES bushings, White gauges, C5 front brakes, !CAGS, Bose/Soundstream audio, CST leather interior, synthetic fluids
Comment
-
Originally posted by Craig 94 TA GTHey Jeff, I am almost certain your Mustang was a factory freak...I'm still trying to figure out everything, but up until now, I thought the early '80s Stangs were 15 second cars My friend has an '84 GT HO 5 spd (175 hp only). Now I thought this thing was a factory freak...he used to beat every Fox Body out there (doing unwise street racing)....roughly 0-100. In all honestly, I never saw him lose to a stock/near stock stang. He would also take out the '94-'95 models. In 1999, we finally took out cars to the track, and the best time he got as a 15.7 with a 2.3 60'. His traction wasn't there, but I don't see how he could have made up a full 1.5 seconds. I also raced several '82'-'93 stock Mustangs...and their best ET were also mid to very low 15s. (I still have their time slips). My other friend had an '89 Mustang that had a best 0-60 run of 6.3 seconds. That was with many bolt-ons. Don't get me wrong, I believe what you're saying, but I've had Ford friends who bought all kinds of '84-'93 Mustangs, and could even get into the 14s2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
-
Originally posted by TraceZI'm really confused. I thought those mustangs were really fast, specially if they have the flame decals in the windows and the huge "BOSS" stickers.
Maybe you havent raced any with the stickers yet??
2002 Electron Blue Vette, 1SC, FE3/Z51, G92 3.15 gears, 308.9 RWHP 321.7 RWTQ (before any mods), SLP headers, Z06 exhaust, MSD Ignition Wires, AC Delco Iridium Spark Plugs, 160 t-stat, lots of ECM tuning
1995 Z28, many mods, SOLD
A proud member of the "F-Body Dirty Dozen"
Comment
Comment