cam swap

[hellskull]

i'm looking for some cams that i could drop into my 95 3.4L v6 instead of the OE ones, i've heard of other people doing it but give the specs of the new cams they put in, any help would be appreciated

[wolfdogs]

do you have a headache?










LOL...your user name......

[Kevin - Blown 95 TA]

Yeah, you don't need a cam to be bad. Just get a personal plate or windshield banner with your username and that should scare all comers...

[hellskull]

no help...

that offered no assistance...

[Kevin - Blown 95 TA]

Sorry Hellscull - couldn't resist. There was a guy on this list back a couple years ago named Bill Spano who modded his V6 to be pretty fast, but he hasn't been around in a while & not many of us are modding V6s. He weightd 400 lbs. and got his car in the low 13's, but I think he had a 3.8, not a 3.4 Maybe you can find him on the internet somewhere, otherwise get thee over to f-body.org and do a search over there.

[hellskull]

thanx bro

[fastTa]

Just call comp cams and tell them your goals and one of their techs can give you some advice. I have heard of cams for the V6 in the mid 220 range for duration @ .050. You can also go from your stock 1.6 rocker ratio to a 1.8 ratio.

Unfortunately there just isn't the aftermarket for the V6 like there is for the V8.

[cbrr_mike]

firebirdv6.com....the users there should have an idea

i had a bunch of links when i had my camaro, but i lost them all

[Injuneer]

Go to 4th Gen FAQ. Look at section 4.2, 3rd item from the bottom of the page.

Q: What aftermarket camshafts are available for the V6?

A: The following 2.8L engine cams fit the '93-'95 3.4L engine:

Manufact. -- Duration --- Lift
-------------Int Exh - Int Exh
----------------------------------------------
GM 12363220 204 216 427 454
GM 12353919 204 214 420 442
GM 14031378 196 203 394 410
Crane 254112 198 204 401 403
Crane 254122 204 214 423 423
Crane 253901 204 216 427 454
Crane 253941 216 228 454 480

[hellskull]

thanx injuneer...