i'm looking for some cams that i could drop into my 95 3.4L v6 instead of the OE ones, i've heard of other people doing it but give the specs of the new cams they put in, any help would be appreciated
Announcement
Collapse
No announcement yet.
cam swap
Collapse
X
-
hellskullTags: None
-
do you have a headache?
LOL...your user name......
The Goldens: Reno and Rocky
2008 C6, M6, LS3, Corsa Extreme C/B, (it flys) & 2008 Yukon loaded (Titanic), 03 Ford Focus..everydaydriver.
Wolfdog Rescue Resources, Inc.:http://www.wrr-inc.org
Home Page: http://www.renokeo.com
sold: 97 Firehawk, 97 Comp T/A, 2005 GTO, 2008 Solstice GXP turbo.
-
hellskull
-
Sorry Hellscull - couldn't resist. There was a guy on this list back a couple years ago named Bill Spano who modded his V6 to be pretty fast, but he hasn't been around in a while & not many of us are modding V6s. He weightd 400 lbs. and got his car in the low 13's, but I think he had a 3.8, not a 3.4 Maybe you can find him on the internet somewhere, otherwise get thee over to f-body.org and do a search over there.
Comment
-
hellskull
-
fastTa
Just call comp cams and tell them your goals and one of their techs can give you some advice. I have heard of cams for the V6 in the mid 220 range for duration @ .050. You can also go from your stock 1.6 rocker ratio to a 1.8 ratio.
Unfortunately there just isn't the aftermarket for the V6 like there is for the V8.
Comment
-
Go to 4th Gen FAQ. Look at section 4.2, 3rd item from the bottom of the page.
Q: What aftermarket camshafts are available for the V6?
A: The following 2.8L engine cams fit the '93-'95 3.4L engine:
Manufact. -- Duration --- Lift
-------------Int Exh - Int Exh
----------------------------------------------
GM 12363220 204 216 427 454
GM 12353919 204 214 420 442
GM 14031378 196 203 394 410
Crane 254112 198 204 401 403
Crane 254122 204 214 423 423
Crane 253901 204 216 427 454
Crane 253941 216 228 454 480Fred
381ci all-forged stroker - 10.8:1 - CNC LT4 heads/intake - CC solid roller - MoTeC engine management - 8 LS1 coils - 58mm TB - 78# injectors - 300-shot dry nitrous - TH400 - Gear Vendor O/D - Strange 12-bolt - 4.11's - AS&M headers - duals - Corbeau seat - AutoMeter gauges - roll bar - Spohn suspension - QA1 shocks - a few other odds 'n ends. 800HP/800lb-ft at the flywheel, on a 300-shot. 11.5 @ 117MPH straight motor
Comment
-
hellskull
Comment