Announcement

Collapse
No announcement yet.

NFB: Survey: Who's your employer?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Got a hammer ?????
    2 firebirds are better the 1.

    Comment


    • #77
      Yep. About 6 different kinds, Big ones, Small one, Soft rubber, Hard Rubber, Sledg......

      Hammers: The universal tool.
      93 A4 Z-28: 383 all forged internals, CC306, Full Port & Pol. Heads 2.002 / 1.60, Comp-r Lift, Pro- Mag RR, 32# injectors, MDS 6AL, Adj. Fuel Reg., 160 Stat, Pcm-4-Less CPU, K&N CAI, 52mm TB, TB Bypass, 8.8 taylor wires, Shift kit, 3000 stall (built trans ), ASM LT's, Meizer WP, 3:73's, Eibach Pro Springs, Poly-graphite Bushings, KYB shocks, BMR LCA / Pan hrd & relocation brackets, Budnik 17x9's., 1LE sways & ALM. Drive Shaft. And on and on and.....

      Comment


      • #78
        What I do for money

        If we have jobs, thats more than a lot of good people have. myself I work for EG&G Defence Materials in Tooele, Utah. Demilling chemical weapons for the Army. Such as GB, VX and Mustard mines, rockets, 155mm and 105mm projos, along with a few thousand Ton containers of the nasty stuff.

        95 Z-28 conv. 3' catback 2' cowl hood, wings west spoiler, 12 bolt Currie with 373 Eaton posi. modified 4-L60E trans

        Comment


        • #79
          Edited: haha - I didn't realize this was such an old thread - I already responded to it back in March - Wake up Kev!


          Hi everybody,

          Well, I work at Briggs & Stratton as an Electrical Engineer mostly testing engines. I develop stuff like alternators, regulators, and spark plugs.

          Comment


          • #80
            I work in sales as a mortgage banker for Quicken Loans... been here since June of this year.
            Former Ride: 2002 Pontiac Trans Am WS6 - 345 rwhp, 360 rwtq... stock internally.

            Current Ride: 2006 Subaru Legacy GT Limited - spec.B #312 of 500

            Comment


            • #81
              Computer Engineer/Journeyman B-pressure Welder
              They dont really complement each other
              I currently work for two companies as a contractor One a school division where Im a Network engineer/administrator and the other for a Bank where Im the systems coordinator(network admin)

              I guess this makes me a Computer Geek.

              Eric W.

              89 Firebird Formula WS6
              Accel/Lingenfelter Super Ram
              6.2L/382.97 ci
              Custom PROM Dyno tuned
              WCT-5 speed
              BW 9-bolt Posi 3.45
              Boss MS 18" Rims
              Headman Headers 1 5/8 Ceramic Coated
              Custom Dual exhaust
              1LE upgrade
              Custom Temperature / Navigation Rear View Mirror
              In a constant state of upgrade!

              Comment


              • #82
                I work for a place called S.W.N.G., Inc. We basically make hydraulic cranes for the railroad industry. Our biggest customers are BNSF, Union Pacific, and Canadian National. It's a small company, so i have many tasks. Since I'm only 19, i get to do the usual grunt work. About once or twice a week i get a marketing project. I have to design different types of brochures to send out to our customers. I also make technical books in reference to our cranes. I do all basic computer work (making business cards, installing software, setting up a network, etc...), and usually have to help out with AP/AR. Then when i'm lucky, i get to go out back and learn how to weld and use cnc machines . Basically just saving up some $$$ so i can become an ASE certified technician. Hopefully one day i will own a custom shop, as well as a garage.
                black 95 t/a, a4, beefed up tranny w/ higher stall converter, transgo shift kit, trans temp gauge, trans cooler, richmond 3.73's, loudmouth, hypertech programmer, 160 thermo, descreened maf, TB bypass and airfoil, trick flow intake elbow, underdrive pulleys, moroso cai, edelbrock panhard rod, bmr stb, slp sfc's, fiberglass firehawk hood, hawk pads, taylor wires, ngk plugs, royal purple fluids,...and hopefully more to come

                Comment


                • #83
                  Full time student. I'm getting my associate's degree in Criminal Justice, and I graduate in May. I also work for my dad full time. He has a kitchen & bath showroom http://www.bobskitchenbath.com

                  I also deejay in the city on the weekends!

                  http://www.djtaso.com <---- Free music!
                  Hercules



                  2008 Sunburst Metallic HHR LT

                  Comment


                  • #84
                    I am a Quality Control Engineer at Nanometrics Inc. We make semi-conductor metrology equipment that analyzes/inspects wafers that make IC chips.

                    Nanometrics

                    Everybody buy lots of electronic goodies for the holidays, so I can buy a Corvette with stock in a year or two

                    Sean
                    1994 Z28, 6 spd, LE2 Heads, GM 1.6 RR, .026" head gasket, SLP: CAI-Headers (CARB legal)-ypipe-2 on the left-lightweight flywheel-short throw, Random tech cat, CF dual friction, LT-4 KM.

                    Comment


                    • #85
                      Friendly's Resturant over 3 years strong. Thats what payed for my car, saving my hard earned cash. I cook, wait tables, and various other jobs. Not bad money for a 17 year old. Then i make some other money on the side from other things.
                      -Lou -

                      1997 30th Anniversary Firebird Formula

                      Comment


                      • #86
                        no longer in the rat race.......time to do what I want to, when I want to and how I want to
                        DWS
                        Silver M6 '95 Formula-sold to MCKNBRD

                        Zaino all the way!!

                        '03 Z06....Donaldson Blackwing, CAGS, '04 Z06 shocks, ceramic pads

                        Comment


                        • #87
                          I work sor Southwest gas corp. (public utility) was a field tech for 20 yrs then switched to PC support (mainly get to play with laptops in our field trucks)
                          1997 Trans AM WS6 vert
                          1 of 463
                          LT4 knock module
                          D. Goetz sub-frame connectors.
                          strut tower brace
                          SLP fan switch
                          160* t/stat
                          Drilled and slotted rotors/ Earls SS brake lines/ Hawk pads
                          DMS 1.5" progressive lowering springs


                          Pictures Here

                          Comment


                          • #88
                            Current and past history

                            I am the Technology Administrator for Towsley's Inc in Manitowoc, WI (http://www.towsleys.com)
                            I administor 50 Workstations, 6 servers (2 2K3 DC's, Exchange, Web, 2 Citrix Servers). I also supervise the Graphic Design Department and Web Design Department. Some of my other job duties include being on the Company Foresite Committee. (Corporate decision making)

                            I have 10 years experience installing and servicing traditional PBX systems and 6 years of IP Telephony. During that time I also worked on PRI and T1 circuits, and well and installing/servicing LAN based Voicemail systems....

                            So, I am a geek too.....
                            Austin Schroeger
                            Looking to Buy 1994-97 F-Body

                            Comment


                            • #89
                              Originally posted by BadWS6
                              I work sor Southwest gas corp. (public utility) was a field tech for 20 yrs then switched to PC support (mainly get to play with laptops in our field trucks)
                              so......

                              you quit passing gas.......

                              and now you are passing viruses...........






                              hahahahahahaaaaaaaa


                              (dukin)

                              The Goldens: Reno and Rocky

                              2008 C6, M6, LS3, Corsa Extreme C/B, (it flys) & 2008 Yukon loaded (Titanic), 03 Ford Focus..everydaydriver.

                              Wolfdog Rescue Resources, Inc.:http://www.wrr-inc.org
                              Home Page: http://www.renokeo.com
                              sold: 97 Firehawk, 97 Comp T/A, 2005 GTO, 2008 Solstice GXP turbo.

                              Comment


                              • #90
                                yep something like that
                                1997 Trans AM WS6 vert
                                1 of 463
                                LT4 knock module
                                D. Goetz sub-frame connectors.
                                strut tower brace
                                SLP fan switch
                                160* t/stat
                                Drilled and slotted rotors/ Earls SS brake lines/ Hawk pads
                                DMS 1.5" progressive lowering springs


                                Pictures Here

                                Comment

                                Working...
                                X